In this article, we will walk you through all-inclusive ways to design one of the most sustainable packaging types in the world – rigid gift box. There are a lot of steps that you must seriously work on when you are about to brainstorm your latest products in your campaigns.
Apart from outlining essential functions like display, store, advertisement, protection, etc., and material such as wood, paper, fabric, metal, plastic, glass and so on, you also need to advance to the stage of choosing box designs.
Scroll down to explore the easy-to-follow illustration.
1. Rigid gift box designs with fully – covered top & bottom
As illustrated in the image, this first type of design comprises two complete parts which 100% cover the inner content. Therefore, it is easy to see there is not much work for the designer team to do since what they need is merely work on the surface of the top cover.
The most important part of this design type is how the two pieces match. The upper part must match seamlessly with the other piece and the two should be removed hassle-free. The automatic machine provided by Khang Thanh will help you meet that requirement at ease.
Tip: Since it is completely covered, end users would thank you a million times if you make a finger hole on the surface.
2. Gift box designs with partially – covered top & bottom
The second type comes in with a partially covered bottom. The bottom part is obviously bigger and is not fully covered by the top part. Therefore, not only does the upper part need designs, the under box does as well.
As we can see, no finger hole is needed in this type of design since it is easier than the type No.1 to pluck. However, the substandard packaging process can raise problems.
The not-up-to-par touching parts of the two make it hard to open or close. Don’t worry, our synchronous machines can help a bunch in avoiding this issue. Since it is partially covered, when you create your artwork, the artwork needs to be applied onto both top cover and exposed bottom cover.
3. Rigid gift box designs top & bottom covers with sidewall
This No.3 hard box design is tailor-made for high-end luxury products like gems, jewelry or expensive electronic devices. The cover layer of the bottom box is called a “cap” and right upon it sits the upper cover.
The designs will be applied to the upper box and around the exposed cap. Similar to the second type, we do not need a finger hole on the covers since the lid is easy enough to slide out.
Note: Any poor quality production leads to deformation or dimension mismatch issues.
4. Top & Bottom gift box with paper base
As the name suggests, this kind of rigid box has a quite thick base of paper at the utmost end of the lower part. This style is very easy to manage and an amazing display outfit for your products.
Normally, the base is less than 5 mm bigger than the height of the bottom cover. Remember to choose the contrast colors for the top cover and the base to make the base stand out.
Typically, this base is a little bigger than bottom cover size by <5mm for each line. When we make design, sometimes, we make the paper base with contrasting color of top cover, so as to show the base in a proper way.
5. Shakable (rotating) cover gift box
This kind of box contains a shakable cover. There are two parts: one base (the inside box) and the shakeable cover. People usually mistakenly refer to it as a book-style box, yet there is a big difference between the two.
The book cover has two faces touching the inside box, while the Shakable (Rotating) Cover Box has only one so it can be stretched 360 degrees.
Its most obvious discrepancy from book style box is that book style box is with two faces glued together with inside cover, while shakable cover box is with only one face glued together, so the cover is able to shake by 360 degree.
6. Book Style gift Box
Let’s dig a little deeper into the definition of this hard box type.
Book-style box is a kind of box structured like a book. It is composed of two parts typically, one is the inside tray, another is the book style cover to enfold it from 3 or 4 faces.
7. Customized book-style box
Following the basic principles of the above packaging, you can even make it better and more personalized with your own desired details.
Sometimes, you will find the normal inside cover is replaced with a very thin laser-cut paper board frame, sometimes, you will find a plastic tab is combined with the inside cover or the exterior cover which will help you to display in retail perfectly.
Read more: The custom gift box – Special packaging type
8. Drawer gift box with multi-chamber structure
There are two different kinds:
- One draw box
You can easily pull the drawer from both sides at ease.
- Two-drawer box
The drawers can be pulled out at each specific side. Both of them have a fabric piece to serve as a handle. The draw rigid box type makes it possible to contain more than one product in one package and still make it look neat.
9. Drawer Box with Half Through Structure
There is only one difference between the last type of drawer box and this type: The sleeve is open at only one side, not both like the former, so it is dubbed the name “Half Through Structure”.
In the design process, we divide the box into small chambers to make room for different pieces of merchandise in just one box!
10. Drawer Gift Box with Hanger Tab
In essence, this kind of packaging is a drawer box (both through and half through the structure) plus a hanger tab at the side.
By adding this piece of the pattern, these drawer boxes meet the beauty requirements in the retail shops. Besides, to make it look more easeful, and satisfying, the fabric is replaced with a subtle finger hole for users to open it more easily.
At the same time, we tend to make a window on the sleeve to let the inside content be more attractive.
11. Drawer Box with Special Shape Sleeve
In an attempt to kill the boredom which the rectangular and square paper sleeves bring about, we come up with the drawer rigid box with special shape sleeve.
Everything that is not the ordinary shapes is strongly encouraged like somehow crooked or curved sleeves. Also, we can design some window patterns to reveal the good and let it come closer to shop visitor.
12. Joint Paper Box with Metal Connection
This Paper box is one of the most noticeable box design options in the packaging world. This kind of box also includes top & bottom covers. Nonetheless, the way they connect to each other is noteworthy.
In concrete, the two pieces are attached together using the metal joint. The mental joint adds more strength for the linking part, so the top cover is able to stand still more easily without falling down.
13. Joint Paper Box with Paper Connection
Unlike the metal joint, the paper joint connection is more suitable to apply for delicate gifts such as gift boxes, personal care product packaging, tea gift boxes, suit boxes, light bulb boxes, etc.
This kind of box seems quite fragile hence it needs a ribbon to back up for the top cover, otherwise it might collapse to the floor.
14. Foldable Gift Box
This is the solution for suppliers and brands to cut costs in storage and freight. This style is suitable for food, gift, and shoes (of all types).
This type of packaging requires thin paperboard to have the cover slotted. If it is too thick, the box is breakable and it will not meet the need for folding. This is an important point that the designer team must pay attention to in the brainstorming process.
Put it simply, the interior surface is designed with multiple slot lines and are structurally glued together. These slot lines and glued parts make these boxes foldable, which helps save lots of room and time and energy for shop assistants.
15. Round Rigid Box
Round box is the boxes with round shape, and we call them hat box or cylindrical box. Typically, it is composed by one piece of hat on top and one piece of body on bottom.
The body height depends on your requirement. You can go to our free structure design, so as to decide the final body height and hat height. The hat can be with raised edge or without.
It is a very traditional box structure, and widely used for gift box, candle box, candy box, wedding box, etc.
Read more: Paper Box – The face of every brand
16. Rigid gift Box with Window (PVC / PET)
All boxes with the window patching are in the category of “box with window”. This type of packaging’s application: apparel boxes, automotive product packaging, F&B, or electronic devices, etc. PET or PVC sheets are often chosen to be window’s covering.
17. Custom Shape Gift Box
We offer the service by which you can tremendously stir up your imagination by combining those mentioned typical box structures with irregular shapes.
No matter what final custom structure you finalize, it will become more or less the symbol for your brand. Let the packaging (especially luxury rigid boxes) tell your own voice!
Khang Thanh – The packaging manufacturer in Vietnam specializes in producing luxury paper boxes, cardboard boxes, corrugated boxes, recycled boxes and so on. Contact us to support your brand with the right packaging:
KHANG THANH – HOUSE OF PACKAGING
Tel: (+84) 77 8878 222
Email: info@khangthanh.com